Dissident Plates & Hardware Kit

**OUR RAILS/ RAIL KITS NOW COME 100 GRIT GARNET MEDIA BLASTED FREE OF CHARGE**

We are proud to offer plate and hardware kits for Mprtech’s latest release, the Dissident! This is all of the hardware required for building the Dissident as per the original file’s required hardware list in the original file’s “Dissident Assembly Guide” information. We’ve made some upgrades where available, and completed some of the assembly work for you as well!

Benefits of our kit:

– Thorough pre-inspection of all SCS plates to ensure dimensional accuracy

– Deburred metal plates

– 100 grit garnet media blasted metal plates (recommended surface prep from Cerakote for proper adhesion of coatings)

– Pre-countersunk side plates

– M3x0.5 tapped/ threaded charging handle (Drilled, and pinned available as an option)

– M4x0.7 tapped/ threaded Rear Trunion Plate

– Upgraded hardware where available (better grading/class/material/strength/etc)

– Upgraded W1 Tool Steel 350mm Rod (To reduce bending and increase strength)

– W1 Tool Steel 350mm Rod Threaded M3x0.5 only on ends (opposed to fully threaded stainless)

– Fully assembled charging handle including printed pieces (available as an option)

Kit includes:

2 – M4x12 Flat Head Screws
6 – M5x10 Flat Head Screws
8 – M5x12 Flat Head Screws

1 – M3x10 Socket Head Cap Screw (Pictured assembled in charging handle)
1 – M3x14 Socket Head Cap Screw (Pictured assembled in charging handle)
4 – M4x55 Socket Head Cap Screws
1 – M5x25 Socket Head Cap Screw
2 – M4x12 Button Head Screws
1 – M5x40 Stainless Steel Dowel Pin
1 – 1/8×1/4 Roll Pin (Pictured assembled in charging handle, originally required 1/2″ to be cut down)
2 – M3 Shallow Square Nuts
14 – M5 Shallow Square Nuts

2 – M3 Hex Nuts (Pictured assembled in charging handle/ 350mm M3 Threaded Rod)

1 – M5 Heatset Insert
1 – M3x10 Barrel Nut (Pictured assembled on 350mm M3 Threaded Rod)
2 – M4x40 Barrel Nuts
1 – 350mm W1 Tool Steel Rod, M3x0.5 Threaded Ends

1 – Charging Rod – 316 Stainless Steel (Pictured assembled in charging handle)
1 – Charging Latch – 4130 Chromoly (Pictured assembled in charging handle)
1 – Charging Handle – 316 Stainless Steel (Pictured assembled in charging handle)
1 – Trunnion Top – Mild Steel
1 – Trunnion Rear – Mild Steel

1 – Front Recoil Plate – Carbon Fiber

1 – Rear Recoil Plate – Carbon Fiber
1 – Right Plate – 7075 Aluminum

1 – Left Plate – 7075 Aluminum

NOTE:  All metal plates are shipped in a 100 grit garnet media blasted finish. If you would like a raw finish, which may be an easier base for polishing your rails, please contact us before purchase so we can check stock. We usually keep a few sets on hand. Aluminum side plates may show oxidation after blasting. This is normal and is simply a property of aluminum. Kit does not include DB or Krrawn DXF file plates. Assembled Charging Handle uses Black eSun PLA+ on BambuLabs X1C.